| |
NO. 325-PD
DECK-O-FOAM
EXPANSION JOINT FILLER
Technical Description
SEALTIGHT DECK-O-FOAM Expansion Joint Filler is a flexible,
lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It
is a chemical-resistant, ultraviolet stable, non-absorbent, low-density,
economical, compressible foam that offers an extended service life in both
interior and exterior applications.
DECK-O-FOAM is supplied with a convenient pre-scored
"removable" strip to provide a uniform sealing reservoir in the joint.
It also serves as a sealant bond-breaker and provides an economical alternative
as an expansion joint in all concrete paving projects. It is compatible with all
currently available cold-applied sealants.
Uses
SEALTIGHT DECK-O-FOAM is ideal for use as an expansion,
contraction and/or isolation joint in swimming pool decks, curb and gutter work,
floor slabs, pavement patch repair, sidewalks, driveways, plazas, parking decks,
highways and airport runways.
Features and Benefits
 | Pre-scored strip is easily removed
| Economical alternative to expansion joints
| Controls amount of sealant needed and acts as a
bond-breaker
| Eliminates costly sawing and routing
| Flexible, lightweight and can be formed around curved
objects
| Easy to install
| Can be used in interior or exterior applications |
| | | | | |
Technical Data
TEST METHOD TYPICAL VALUE
| Color |
N/A |
Gray |
| Density |
ASTM D 1622 |
2.0 Ibs/ft³ (32.04 kg/m³) |
| Compression |
|
|
| 10% Deflection |
ASTM D 3575 |
10 psi (69 KPa) max. |
| 80% Deflection |
ASTM D 3575 |
125 psi (862.49 KPa) max. |
| Tensile Strength |
ASTM D 3575 |
55 psi (379.50 KPa) |
| Water Absorption |
ASTM D 3575 |
0.5% vol. max. |
| Temperature Stability |
N/A |
-40ºF to 160ºF (-40ºC to 71ºC) |
These physical properties are typical, but should not be used
in specifying material due to differences which could result from variations in
testing methods.
Application
Attach the DECK-O-FOAM securely to the existing concrete
slab, coping or form with tape or mechanical fasteners prior to pouring the next
slab. Make sure that the DECK-O-FOAM is level with the desired slab surfaces
before finishing. If specifications require the use of a cold-applied sealant,
remove the pre-scored strip and apply the sealant following the manufacturer's
instructions.
Packaging
| 1/4" x 3" x 100' |
20 rolls/bale |
1/2" x 3" x 50' |
20 rolls/bale |
| 1/4" x 4" x 100' |
15 rolls/bale |
1/2" x 3 1/2" x 50' |
17
rolls/bale |
| 1/4" x 6" x 100' |
10
rolls/bale |
1/2" x 4" x 50' |
15 rolls/bale |
| 1/4" x 8" x 100' |
7
rolls/bale |
1/2" x 5" x 50' |
12 rolls/bale |
| 1/4" x 48" x 100' |
1
roll/bale |
1/2" x 6" x 50' |
10 rolls/bale |
|
|
1/2" x 8" x 50' |
7 rolls/bale |
| |
|
1/2" x 12" x 50' |
5
rolls/bale |
|
|
1/2" x 48" x 50' |
1 roll/bale |
This material last updated January 2002.
W. R. MEADOWS, INC. warrants that, at the time and place
we make shipment, our materials will be of good quality and will conform with
our published specifications in force on the date of acceptance of the order.
THE FOREGOING WARRANTY SHALL BE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES OTHERWISE ARISING BY
OPERATION OF LAW, COURSE OF DEALING, CUSTOM OF TRADE OR OTHERWISE. As the
exclusive remedy for breach of this Warranty, we will replace defective
materials, provided, however, that the buyer examine the materials when received
and promptly notify us in writing of any defect before the materials are used or
incorporated into a structure. Three (3) months after W. R. MEADOWS, INC. has
shipped the materials, all our Warranty and other duties with respect to the
quality of the materials delivered shall conclusively be presumed to have been
satisfied, all liability therefore terminates, and no action for breach of any
such duties may thereafter be commenced. W. R. MEADOWS, INC. shall in no event
be liable for consequential damages. Unless otherwise agreed to in writing, no
warranty is made with respect to materials not manufactured by W. R. MEADOWS,
INC. We cannot warranty or in any way guarantee any particular method of use or
application of the performance of materials under any particular condition.
Neither this Warranty nor our liability may be extended or amended by our
salesmen, distributors or representatives, or by our distributor's
representatives, or by any sales information or drawings.
|
