| |
NO. 324
PLASTIC JOINT MATERIALS
Broad range of plastic expansion/contraction joints and
caps to meet a variety of concrete construction project needs.
SEALTIGHT PLASTIC JOINT MATERIALS consist of expansion/contraction joints,
tongue and groove joint forms and expansion joint caps designed to handle a
variety of concrete flatwork construction requirements.
SEALTIGHT SPEED-E-JOINT®
SEALTIGHT SPEED-E-JOINT Preformed Contraction Joint consists of 2 solid pieces
which have been preassembled for easy handling and installation.
SPEED-E-JOINT offers an ideal solution to controlling cracks in concrete. It is
a rigid preformed contraction joint that produces a straight line crack on the
surface of concrete slabs and locks into the aggregate just below the surface.
SPEED-E-JOINT is strong, economical and eliminates waste in providing straight
lines. It is quick and easy to install. The top section pulls free once the
joint has been placed correctly in the wet concrete.
Furnished in 3 depths: 1", 1-1/2", and 2" (25.4mm, 38.1mm and
50.8mm). Standard length is 10 feet (3.05m).
SEALTIGHT Deck-O-Joint® Vinyl Expansion
Joint
SEALTIGHT DECK-O-JOINT Vinyl Expansion Joint is a decorative
expansion joint for use wherever concrete is placed. It is economical, long
lasting and trouble-free...resists acids, alkali, chlorine, etc. A light hose
down keeps it bright and clean.
DECK-O-JOINT will not whip or warp during application. It locks into concrete
and adjusts for any slab movement. DECK-O-JOINT's exclusive channel design
prevents excessive seepage and water damage. Colors: Stone Gray, Desert Tan and
Dura-White.
SEALTIGHT KEYWAY™ Vinyl Tongue and Groove
Joint Form
SEALTIGHT KEYWAY Tongue and Groove Joint Form is lightweight,
flexible and an easy way to mold a keyed tongue and groove construction joint.
KEYWAY will not whip or warp and resists impact. It strips quickly and can be
reused or left in place.
SEALTIGHT SNAP-CAP® Expansion Joint Cap
SEALTIGHT SNAP-CAP Expansion Joint Cap provides a time and
cost-saving method for forming straight, uniform and debris-free joints of the
proper configuration, ready to seal. The top of the SNAP-CAP pulls free and can
be discarded. The exposed concrete surfaces assure balanced adherence to the
sides. It is ideal for both horizontal and vertical concrete projects. SNAP-CAP
is available in 4 widths as shown in the table.
Application Tools
|
Hammer |
Staple Gun |
Knife |
|
Hacksaw |
Screwdriver |
Application
SEALTIGHT SPEED-E-JOINT Preformed Contraction Joint
To install SEALTIGHT SPEED-E-JOINT, press
straight edge cutting tool into the wet concrete to part the aggregate in a
straight line. Place the SPEED-E-JOINT into the separation until the top segment
lays on the surface of the wet concrete. Remove the top. Float concrete to fill
all voids adjacent to the SPEED-E-JOINT and finish in the normal manner.
SEALTIGHT DECK-O-SEAL Vinyl Expansion Joint
Press SEALTIGHT DECK-O-JOINT into the wet concrete until top is
level with the concrete. Float concrete to fill all voids adjacent to the
DECK-O-JOINT. Finish in the normal manner. Remove protective tape.
SEALTIGHT KEYWAY Vinyl Tongue and Groove Joint Form
Nail or staple SEALTIGHT KEYWAY to the form or header prior to
pouring concrete. Pour the concrete. After the concrete sets up, remove the
KEYWAY to leave the ideal tongue and groove type joint. If desired, KEYWAY can
be left in place.
SEALTIGHT SNAP-CAP Expansion Joint Cap
To install, slide the SEALTIGHT SNAP-CAP cap over the top of the
expansion joint. Place the concrete and screed to finish grade as usual. When
concrete is cured, insert a screwdriver through the top of the SNAP-CAP, pull
free and discard. The joint is ready to seal.
SEALTIGHT Plastic Joint Materials Size Information
TYPE
Speed-E-Joint
Deck-O-Joint
Keyway
Snap-Cap
|
WIDTHS
NA
5/8" (15.88mm)
NA
3/8" (9.53mm) 1/2" (12.7mm)
3/4" (19.05mm) 1" (25.4mm) |
DEPTHS
1" (25.4mm) 1-1/2 (38.1mm)
1-5/8" (41.3mm)
3-1/2"(88.9mm)
1/2" (12.7mm)
1/2" (12.7mm) |
LENGTH
10' (3.05m)
10' (3.05m)
10' (3.05m)
10' (3.05m)
10' (3.05m) |
This material last updated May 2000.
W. R. MEADOWS, INC. warrants that, at the time and place
we make shipment, our materials will be of good quality and will conform with
our published specifications in force on the date of acceptance of the order.
THE FOREGOING WARRANTY SHALL BE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER WARRANTIES OTHERWISE ARISING BY
OPERATION OF LAW, COURSE OF DEALING, CUSTOM OF TRADE OR OTHERWISE. As the
exclusive remedy for breach of this Warranty, we will replace defective
materials, provided, however, that the buyer examine the materials when received
and promptly notify us in writing of any defect before the materials are used or
incorporated into a structure. Three (3) months after W. R. MEADOWS, INC. has
shipped the materials, all our Warranty and other duties with respect to the
quality of the materials delivered shall conclusively be presumed to have been
satisfied, all liability therefore terminates, and no action for breach of any
such duties may thereafter be commenced. W. R. MEADOWS, INC. shall in no event
be liable for consequential damages. Unless otherwise agreed to in writing, no
warranty is made with respect to materials not manufactured by W. R. MEADOWS,
INC. We cannot warranty or in any way guarantee any particular method of use or
application of the performance of materials under any particular condition.
Neither this Warranty nor our liability may be extended or amended by our
salesmen, distributors or representatives, or by our distributor's
representatives, or by any sales information or drawings.
|
